1、涂料厂组合隔间欧盟CE认证指令

MD机械指令：2006/42/EC

2、涂料厂组合隔间欧盟CE认证标准：

EN ISO 12100：2010 机械安全 - 用于设计的一般准则-风险评估及风险降低

EN 60204-1：2018 机械安全.机械电气设备.第1部分：一般要求

EN 13355:2004+A1:2009 Coating plants - Combined booths - Safety requirements涂料厂.组合隔间.安全要求

3、EN 13355:2004+A1:2009适用范围：

This document is applicable to combined booths for the application of organic liquid coating materials by an operator with maximum drying temperature of 100 °C and deals with all hazards significant for combined booths, when they are used as intended and under the conditions foreseen by the manufacturer (see clause 4). To the extent of this document, a combined booth is considered an assembly of the following equipment: forced ventilation by one or more fans, ventilation air heating system (e. g. heat exchanger or burner), power driven dampers, forced ventilation ducting, dry air filtering and/or wet air washing systems, automatic fire extinguishing equipment and additional specific electrical equipment, control and power circuits joined together for the spraying and drying process of liquid coating material in a space totally enclosed provided with forced ventilation. working pit, in special case. This document does not cover:

a) booths for automatic spraying, powder spray booths, open booths, and portable heaters.

b) design of the building foundations upon which a booth is installed;

c) the civil engineering and building design where a booth is constructed as, or to use part of, a new or existing building;

d) spraying equipment (see EN 1953), automatic devices for spraying systems like robots (see EN 775) or reciprocators or similar systems, conveyors, lifts and continuous handling equipment and systems (see EN 619). This document is not applicable to combined booths which are manufactured before the date of publication of this standard by CEN.

本文件适用于操作员在*高干燥温度为100°C的条件下使用有机液体涂层材料的组合展位，并处理了在制造商预见的条件下按预期使用组合展位时的所有重大危险（见第4条）。在本文件范围内，组合式隔间被视为以下设备的组件：一个或多个风扇的强制通风、通风空气加热系统（如热交换器或燃烧器）、电动风门、强制通风管道、干空气过滤和/或湿空气洗涤系统、自动灭火设备和其他特定电气设备，控制电路和电源电路连接在一起，用于在具有强制通风的完全封闭的空间中对液体涂层材料进行喷涂和干燥过程。工作坑，在特殊情况下。本文件不包括：

a） 自动喷涂展位、粉末喷涂展位、开放式展位和便携式加热器。

b） 安装展位的建筑基础的设计；

c） 土木工程和建筑设计，其中展台被建造为新建筑或现有建筑，或使用新建筑或已有建筑的一部分；

d） 喷涂设备（见EN 1953）、机器人等喷涂系统的自动装置（见EN 775）或往复式或类似系统、输送机、升降机和连续搬运设备和系统（见EN 619）。本文件不适用于在CEN发布本标准之前制造的组合展位。